(406) 333-1795 [email protected]

Post Flight & Storage

Post Flight

  1. Disconnect the battery from the aircraft.
  2. Power down the GCS.
  3. Visually survey all electrical and mechanical connections.

Storage

Retract the GPS Mast

Unsecure and lower the GPS mast by lifting the pull pin vertically and rotating the mast back toward the tail motor.

GPS mast storage instructions

Retract the Rotors

Fold in the tail rotors so the blades point forward.

diagram folding rotors

Retract Arms and Landing Gear

1. Select one arm and pull out on the corresponding red knob.

Releasing pull pins on the underside of the aircraft

2. Rotate the arm towards the tail.

Diagram folding in the arms for storage.

3. Once reaching the stop, release the knob to allow locking.

Diagram - seating a pull pin into the locking position

4. Gently move the boom back and forth to verify the knob is engaged and seated.

5. Repeat this process with the other arm.

Stowed Position


6. Place the aircraft in its case and secure latches.